Gardner Impact Testing Explained: ASTM D5420
ASTM D5420 measures the impact resistance of a flat, rigid plastic specimen struck by a falling weight. Here is what mean failure energy means, and why thickness and temperature belong with the result.
Test methods for dimensional stability, abrasion resistance, Taber, Martindale, and other mechanical and physical property testing for automotive plastics and materials.
ASTM D5420 measures the impact resistance of a flat, rigid plastic specimen struck by a falling weight. Here is what mean failure energy means, and why thickness and temperature belong with the result.
Shear adhesion testing measures the load a bonded joint carries when two adherends are pulled in opposite directions along the bond line. ASTM D3163 and ASTM D3164 both apply that idea to adhesively bonded plastic lap-shear joints under tension loading, and each one defines a different joint. What Shear Adhesion Testing Measures In a lap-shear…
ASTM D570 is the standard test method for water absorption of plastics. It measures the relative rate at which a plastic absorbs water when immersed, and it reports the result as percent weight gain. What ASTM D570 Covers ASTM D570 (the current edition is D570-22) determines the relative rate of absorption of water by plastics…
ASTM E1269 determines the specific heat capacity of a material by differential scanning calorimetry (DSC), comparing the heat flow into a specimen with the heat flow into a sapphire reference. The result is a measured value for the energy a material absorbs per unit of mass for each degree of temperature rise. What ASTM E1269…
Vicat softening point and heat deflection temperature both describe how a plastic behaves as it heats up, but they answer different design questions. One tells you when a surface starts to give. The other tells you when a part carrying a load starts to sag. Two Numbers a Designer Reads Differently When a plastic part…
When a bonded joint breaks in a test, the number it gives up is only half the result. The other half is the fracture surface itself, which tells you why it broke and what to fix. Shear and peel testing are the two ways to load a bond, but the real diagnostic value is in…
A seat fabric and a painted instrument panel both wear. But a Taber abrasion wheel grinding across a fabric specimen is not simulating what happens when a driver slides in and out of a car seat every day. And a Martindale rub tester tracking a Lissajous pattern across a coated panel is not capturing the…
A material can meet every specification at the time of qualification and still fail six months after launch. The part warps after heat aging. The nylon component swells with moisture and no longer fits the assembly. The gasket loses thickness under compression and the seal leaks. Dimensional stability testing measures how a material changes shape…