Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
ISO ISO 15512 (Methods A and B) Plastics – Determination of Water Content
ISO ISO 15701 Leather — Tests for colour fastness — Colour fastness to migration into polymeric material
ISO ISO 1628 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
ISO ISO 171 Plastics — Determination of bulk factor of moulding materials
ISO ISO 17235 Leather — Physical and mechanical tests — Determination of softness
ISO ISO 175 Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
ISO ISO 176 Plastics — Determination of loss of plasticizers — Activated carbon method
ISO ISO 178 Plastics — Determination of flexural properties
ISO ISO 179 Plastics — Determination of Charpy impact strength of rigid materials
ISO ISO 1798 Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
ISO ISO 180 Plastics — Determination of Izod impact strength
ISO ISO 1817 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
ISO ISO 1856 Flexible cellular polymeric materials — Determination of compression set
ISO ISO 188 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
ISO ISO 1923 Cellular plastics and rubbers — Determination of linear dimensions
ISO ISO 1926 Rigid cellular plastics — Determination of tensile properties
ISO ISO 2039-2 Plastics — Determination of hardness — Part 2: Rockwell hardness
ISO ISO 20433 Leather — Tests for colour fastness — Colour fastness to crocking
ISO ISO 2062 Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
ISO ISO 22088-3 Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 3: Bent strip method

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation
AATCC AATCC EP1 Evaluation Procedure of Grey Scale for Color Change
AATCC AATCC EP2 Evaluation Procedure of Grey Scale for Staining
AATCC AATCC EP8 Evaluation Procedure of Grey Scale for AATCC 9 Step Chromatic Transference Scale
AATCC AATCC TM 107 Colorfastness to Water
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test
AATCC AATCC TM 15 Colorfastness to Perspiration
AATCC AATCC TM 16.2 Colorfastness to Light
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) Calculation of Small Color Differences for Acceptability
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion
ASTM ASTM D1056 Flexible Cellular Materials—Sponge or Expanded Rubber
ASTM ASTM D1056 Flexible Cellular Materials—Sponge or Expanded Rubber