Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
ASTM ASTM D4476 Flexural Properties of Fiber Reinforced Pultruded Plastic Rods | Flex
ASTM ASTM D4533 Trapezoid Tearing Strength of Geotextiles | Tear Strength: Trapezoid
ASTM ASTM D4585 Testing Water Resistance of Coatings Using Controlled Condensation | Humidity
ASTM ASTM D461 Test Method for Felt | Tensile
ASTM ASTM D4632 Grab Breaking Load and Elongation of Geotextiles | Tensile
ASTM ASTM D4705 Stitch Tear Strength of Leather, Double Hole | Tear Strength: Stitch
ASTM ASTM D471 Rubber Property—Effect of Liquids | Fluid Immersion / Extraction
ASTM ASTM D4812 Unnotched Cantilever Beam Impact Resistance of Plastics | Impact
ASTM ASTM D4966 Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method) | Abrasion: Martindale
ASTM ASTM D5028 Curing Properties of Pultrusion Resins by Thermal Analysis | Thermal Analysis
ASTM ASTM D5031 Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings | Weathering
ASTM ASTM D5034 Breaking Strength and Elongation of Textile Fabrics (Grab Test) | Tensile
ASTM ASTM D5035 Breaking Force and Elongation of Textile Fabrics (Strip Method) | Tensile
ASTM ASTM D5071 Exposure of Photodegradable Plastics in a Xenon Arc Apparatus | Weathering
ASTM ASTM D5132 Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles | Flammability
ASTM ASTM D523 Specular Gloss | Gloss
ASTM ASTM D5279 Plastics: Dynamic Mechanical Properties: In Torsion | Shear Strength
ASTM ASTM D5393-931 Determination of Fogging Characteristics of Vehicle Interior Trim Materials (Withdrawn 1998) | Fogging
ASTM ASTM D5402 Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs | Paint Adhesion
ASTM ASTM D5420 Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) | Impact

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber