Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
ASTM ASTM D2137 Rubber Property – Brittleness Point of Flexible Polymers and Coated Fabrics | Low Temperature Brittleness
ASTM ASTM D2196 Rheological Properties of Non-Newtonian Materials by Rotational Viscometer | Viscosity
ASTM ASTM D2208 Breaking Strength of Leather by the Grab Method | Tensile
ASTM ASTM D2209 Tensile Strength of Leather | Tensile
ASTM ASTM D2211 Elongation of Leather | Tensile
ASTM ASTM D2240 (Shore A, D) Rubber Property—Durometer Hardness | Hardness
ASTM ASTM D2244 Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates | Color Evaluation
ASTM ASTM D2247 Testing Water Resistance of Coatings in 100 % Relative Humidity | Humidity
ASTM ASTM D2256 Tensile Properties of Yarns by the Single-Strand Method | Tensile
ASTM ASTM D2261 Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) | Tear Strength: Tongue
ASTM ASTM D2344 Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates | Flex
ASTM ASTM D256 Determining the Izod Pendulum Impact Resistance of Plastics | Impact
ASTM ASTM D2565 Xenon-Arc Exposure of Plastics Intended for Outdoor Applications | Weathering
ASTM ASTM D2584 Ignition Loss of Cured Reinforced Resins | Filler
ASTM ASTM D2842 Water Absorption of Rigid Cellular Plastics | Water Absorption
ASTM ASTM D297 (Hydrostatic Method s.16.3) Rubber Products – Chemical Analysis | Density / Weight
ASTM ASTM D3012 Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven | Oven / Exposure Cycle
ASTM ASTM D3045 Heat Aging of Plastics Without Load | Oven / Exposure Cycle
ASTM ASTM D3163 Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading | Shear Strength
ASTM ASTM D3164 Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading | Shear Strength

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber