Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
ISO ISO 75 Plastics and ebonite — Determination of temperature of deflection under load | HDT / VICAT /SOFT POINT
ISO ISO 7619-1 Rubber, Vulcanized or Thermoplastic – Determination of Indentation Hardness – Part 1: Durometer Method (Shore Hardness) | Hardness
ISO ISO 8033 Rubber and plastics hoses — Determination of adhesion between components | Peel
ISO ISO 8067 Flexible cellular polymeric materials — Determination of tear strength | Tear Strength: Tongue
ISO ISO 812 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness | Low Temperature Brittleness
ISO ISO 815 Rubber, vulcanized or thermoplastic — Determination of compression set at ambient, elevated or low temperatures | Compression
ISO ISO 8295 Plastics — Film and sheeting — Determination of the coefficients of friction | Friction
ISO ISO 844 Rigid cellular plastics — Determination of compression properties | Compression
ISO ISO 845 Cellular plastics and rubbers — Determination of apparent density | Density / Weight
ISO ISO 846 Plastics — Evaluation of the action of microorganisms | Fungus / Mildew
ISO ISO 8510-2 Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 180 degree peel | Peel
ISO ISO 868 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) | Hardness
ISO ISO 9073-1 Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area | Density / Weight
ISO ISO 9073-2 (Method A) Textiles – Test Methods for Nonwovens – Part 2: Determination of Thickness | Textile Construction
ISO ISO 9073-3 Textiles – Test Methods for Non-Wovens – Part 3: Determination of Tensile Strength and Elongation | Tensile
ISO ISO 9073-4 Nonwovens – Test Methods – Part 4: Determination of Test Resistance by the Trapezoid Procedure | Tear Strength: Trapezoid
ISO ISO 9227 Corrosion tests in artificial atmospheres — Salt spray tests | Salt Spray / Corrosion
ISO ISO 960 (Method A) Plastics — Polyamides (PA) — Determination of water content (Method A) | Moisture Content
ISO ISO 974 Plastics — Determination of the brittleness temperature by impact | Low Temperature Brittleness
Automotive Jaguar / Land Rover Jaguar Land Rover TPJLR.52.413 Resistance to W-Flex | Flex

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber