Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
ISO ISO 105-G02 Textiles — Tests for colour fastness — Part G02: Colour fastness to burnt-gas fumes | Stain
ISO ISO 105-X12 Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing | Crocking
ISO ISO 1133 Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics | Melt Flow
ISO ISO 11357-1 Plastics — Differential scanning calorimetry (DSC) | Thermal Analysis
ISO ISO 11357-2 Plastics — Differential scanning calorimetry (DSC) | Thermal Analysis
ISO ISO 11357-3 Plastics — Differential scanning calorimetry (DSC) | Thermal Analysis
ISO ISO 11358-1 Plastics — Thermogravimetry (TG) of polymers — General principles | Thermal Analysis
ISO ISO 11359-1 Plastics — Thermomechanical analysis (TMA) | Thermal Analysis
ISO ISO 11359-2 Plastics — Thermomechanical analysis (TMA) | Thermal Analysis
ISO ISO 11359-3 Plastics — Thermomechanical analysis (TMA) | Thermal Analysis
ISO ISO 11644 Adhesion of Leather Finish | Peel
ISO ISO 1172 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods | Filler
ISO ISO 1183-1 (Method A) Plastics – Methods for Determinging the Denisty of Non-Cellular Plastics | Density / Weight
ISO ISO 1184 Plastics — Determination of tensile properties of films | Tensile
ISO ISO 12945-2 Textiles – Determination of Fabric Propensity to Surface Pilling, Fuzzing or Matting – Part 2: Modified Martindale Method | Abrasion: Martindale
ISO ISO 12947-1 Textiles – Determination of the Abrasion Resistance of Fabrics by the Martindale Method – Part 1: Martindale abrasion testing apparatus | Abrasion: Martingale
ISO ISO 12947-2 Textiles – Determination of the Abrasion Resistance of Fabrics by the Martindale Method – Part 2: Determination of specimen breakdown | Abrasion: Martingale
ISO ISO 13934 Textiles — Tensile properties of fabrics | Tensile
ISO ISO 13935 Textiles – Seam Tensile Properties of Fabrics and Made-Up Textile Articles | Seam Strength
ISO ISO 13937-2 Textiles — Tear properties of fabrics — Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) | Tear Strength: Tongue

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber