Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.

Industry Publisher Spec ID Title
Automotive GM GMW14093 Determination of Impact Resistance of Plastic Components | Impact
Automotive GM GMW14102 Determination of Water Spotting Test | Stain
Automotive GM GMW14124 Automotive Environmental Cycles | Oven / Exposure Cycle
Automotive GM GMW14125 (Appendix F and H) Linear Abrasion Testing | Scuff / Mar
Automotive GM GMW14126 Resistance to Cold Crack of Folded Materials | Impact Falling Weight
Automotive GM GMW14127 Impact Cold Crack | Impact Falling Weight
Automotive GM GMW14130 Resistance to Marring or Scuffing | Scuff / Mar
Automotive GM GMW14131 Compatibility of Interior Trim Materials With Amines | Stain
Automotive GM GMW14132 Resistance to Blocking | Peel
Automotive GM GMW14141 Dye Migration | Stain
Automotive GM GMW14145 Seam Strength for Seating Materials | Seam Strength
Automotive GM GMW14148 Resistance to Loop Pullout of Floor Carpet | Tensile
Automotive GM GMW14162 (Method D) Colorfastness to Artifical Weathering | Weathering
Automotive GM GMW14296 Perspiration Resistance | Stain
Automotive GM GMW14333 Resistance to Fuels of Exteriors Automotive Materials and Components | Paint Adhesion
Automotive GM GMW14334 Chemical Resistance to Fluids | Stain
Automotive GM GMW14334 Chemical Resistance to Fluids | Stain
Automotive GM GMW14445 Sunscreen and Insect Repellant Resistance | Chemical Stress Resistance
Automotive GM GMW14445 Sunscreen and Insect Repellant Resistance | Stain
Automotive GM GMW14458 Copper-Accelerated Acetic Acid Salt Spray (Cass) Test | Salt Spray / Corrosion

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber