Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
Automotive GM GM9450P Mildew Resistance – Mixed Culture Method | Moisture Vapor Transmission
Automotive GM GM9502P (11/88)1 Knife Cross-Hatch Adhesion Test Procedure for Painted Elastomeric Plastic Substrates | Paint Adhesion
Automotive GM GM9504P (2/03)1 Oven Aging Test Procedure for Painted Plastic Substrates | Oven / Exposure Cycle
Automotive GM GM9506P (11/88)1 Dime Scrape Test to Determine Paint Adhesion and Brittleness | Paint Adhesion
Automotive GM GM9507P (9/88)1 Thumbnail Hardness Test for Painted Parts | Paint Adhesion
Automotive GM GM9514P (2/03)1 Recommended Practice for Hot Water Immersion Testing | Fluid Immersion / Extraction
Automotive GM GM9515P (9/88)1 Abrasion Resistance of Organic Coatings (Taber Abraser Method) | Abrasion: Taber
Automotive GM GM9517P (11/88)1 Resistance to Synthetic Perspiration | Stain
Automotive GM GM9518P (7/88)1 Determining Paint Thickness of Painted Flexible Plastic Parts | Film Thickness
Automotive GM GM9542P (8/89)1 Wear Resistance to Hot Stamps and Related Products by Falling Sand Method | Abrasion: Falling Sand
Automotive GM GM9689P (6/14)1 Asphalt Staining Test | Stain
Automotive GM GM9740P (9/88)1 Acrylonitrile, Styrene and Butadiene Compositions In Abs Polymers | Infrared Scan
Automotive GM GM9758P (3/98)1 Adhesion and Durability of Exterior Trims | Oven / Exposure Cycle
Automotive GM GM9758P (3/98)1 Adhesion and Durability of Exterior Trims | Peel
Automotive GM GM9795P (3/90)1 Adhesion and Durability of Bonded Weatherstrip – Pressure Sensitive Adhesive | Peel
Automotive GM GM9797P (3/11)1 Cleavage Peel Test | Peel
Automotive GM GM9904P (1/11)1 Multi-Axial Impact Test | Impact
Automotive GM GME 60276 (7/78)1 Test Method for Determining The Resistance to Odour Propagation of Trim Materials | Odor
Automotive GM GMN6753 (10/12)1 Tensile Properties of Injection Molded Short Glass – Fiber Reinforced Thermoplastics for Use In Finite Element Analysis of Long Flow Length Parts | Tensile
Automotive GM GMN8170 (8/02)1 Resistance to Blocking | Peel

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber