Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.

Industry Publisher Spec ID Title
ASTM ASTM D1056 Flexible Cellular Materials—Sponge or Expanded Rubber | Compression
ASTM ASTM D1056 Flexible Cellular Materials—Sponge or Expanded Rubber | Density / Weight
ASTM ASTM D1056 Flexible Cellular Materials—Sponge or Expanded Rubber | Oven / Exposure Cycle
ASTM ASTM D1056 Flexible Cellular Materials—Sponge or Expanded Rubber | Tensile
ASTM ASTM D1117 Guide for Evaluating Nonwoven Fabrics | Seam Strength
ASTM ASTM D1117 Guide for Evaluating Nonwoven Fabrics | Tear Strength: Elmendorf
ASTM ASTM D1117 Guide for Evaluating Nonwoven Fabrics | Tear Strength: Tongue
ASTM ASTM D1117 Guide for Evaluating Nonwoven Fabrics | Tear Strength: Trapezoid
ASTM ASTM D1117 Guide for Evaluating Nonwoven Fabrics | Tensile
ASTM ASTM D1200 Viscosity by Ford Viscosity Cup | Viscosity
ASTM ASTM D1203 Volatile Loss From Plastics Using Activated Carbon Methods | Volatile Loss
ASTM ASTM D1204 Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature | Shrinkage / DimensionalStability
ASTM ASTM D1238 Melt Flow Rates of Thermoplastics by Extrusion Plastometer | Melt Flow
ASTM ASTM D1278 Rubber from Natural Sources—Chemical Analysis | Filler
ASTM ASTM D1329 Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) | Low Temperature Brittleness
ASTM ASTM D1424 Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus | Tear Strength: Elmendorf
ASTM ASTM D1455 60° Specular Gloss of Emulsion Floor Polish | Gloss
ASTM ASTM D1475 Density of Liquid Coatings, Inks, and Related Products | Density / Weight
ASTM ASTM D1499 Filtered Open-Flame Carbon-Arc Exposures of Plastics | Weathering
ASTM ASTM D1506 Carbon Black—Ash Content | Filler

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking. Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Color Evaluation
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Fogging
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber