Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.

Industry Publisher Spec ID Title
ASTM ASTM D523 Specular Gloss | Gloss
ASTM ASTM D5279 Plastics: Dynamic Mechanical Properties: In Torsion | Thermal Analysis
ASTM ASTM D5393-931 Determination of Fogging Characteristics of Vehicle Interior Trim Materials (Withdrawn 1998) | Fogging
ASTM ASTM D5402 Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs | Paint Adhesion
ASTM ASTM D5420 Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) | Impact
ASTM ASTM D5587 Tearing Strength of Fabrics by Trapezoid Procedure | Tear Strength: Trapezoid
ASTM ASTM D5590 Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay | Fungus / Mildew
ASTM ASTM D5630 (Method B) Ash Content in Plastics | Filler
ASTM ASTM D570 Water Absorption of Plastics | Fluid Immersion / Extraction
ASTM ASTM D573 Rubber—Deterioration in an Air Oven | Oven / Exposure Cycle
ASTM ASTM D5733-99 Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure | Tear Strength: Trapezoid
ASTM ASTM D5734 (2008)1 Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus | Tear Strength: Elmendorf
ASTM ASTM D586 Ash in Pulp, Paper, and Paper Products | Filler
ASTM ASTM D6110 Determining the Charpy Impact Resistance of Notched Specimens of Plastics | Impact
ASTM ASTM D618 Conditioning Plastics for Testing | Conditioning
ASTM ASTM D6182 Flexibility and Adhesion of Finish on Leather | Flex
ASTM ASTM D624 Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers | Tear Strength: Die “C”
ASTM ASTM D629 Quantitative Analysis of Textiles | Fluid Immersion / Extraction
ASTM ASTM D635 Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | Flammability
ASTM ASTM D638 Tensile Properties of Plastics | Tensile

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking. Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Color Evaluation
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Fogging
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber