Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
ASTM ASTM D3801 Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position | Flammability
ASTM ASTM D3826 Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test | Tensile
ASTM ASTM D3846 In-Plane Shear Strength of Reinforced Plastics | Shear Strength
ASTM ASTM D3850 Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA) | Thermal Analysis
ASTM ASTM D3882 Bow and Skew in Woven and Knitted Fabrics | Textile Construction
ASTM ASTM D3884 Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) | Abrasion: Taber
ASTM ASTM D3886 Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus) | Abrasion: Stolle
ASTM ASTM D3887 Standard Specification for Tolerances for Knitted Fabrics (Withdrawn 2017) | Density / Weight
ASTM ASTM D3895 Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry | Thermal Analysis
ASTM ASTM D395 Rubber Property—Compression Set | Compression
ASTM ASTM D4060 Abrasion Resistance of Organic Coatings by the Taber Abraser | Abrasion: Taber
ASTM ASTM D4065 Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures | Shear Strength
ASTM ASTM D412 Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers-Tension | Tensile
ASTM ASTM D413 Rubber Property—Adhesion to Flexible Substrate | Peel
ASTM ASTM D4138 (Procedure A) Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means | Film Thickness
ASTM ASTM D4157 Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method | Abrasion: Wyzenbeek
ASTM ASTM D4339 Determination of the Odor of Adhesives | Odor
ASTM ASTM D4355 Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus | Weathering
ASTM ASTM D4459 Xenon-Arc Exposure of Plastics Intended for Indoor Applications | Weathering
ASTM ASTM D4475 Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method | Flex

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber