Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
ISO ISO 20433 Leather — Tests for colour fastness — Colour fastness to crocking | Crocking
ISO ISO 2062 Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester | Tensile
ISO ISO 22088-3 Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 3: Bent strip method | Chemical Stress Resistance
ISO ISO 2286-2 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate | Density / Weight
ISO ISO 2286-3 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness | Textile Construction
ISO ISO 2409 Paints and varnishes — Cross-cut test | Paint Adhesion
ISO ISO 2411 Rubber or Plastics-Coated Fabrics – Determination of Coating Adhesion | Peel
ISO ISO 2440 Flexible and Rigid Cellular Polymeric Materials – Accelerated Ageing Tests | Oven / Exposure Cycle
ISO ISO 2578 Plastics — Determination of time-temperature limits after prolonged exposure to heat | Oven / Exposure Cycle
ISO ISO 2589 Leather — Physical and mechanical tests — Determination of thickness | Textile Construction
ISO ISO 26082-1 Leather – Physical and Mechanical Test Methods for the Determination of Soiling – Part 1: Rubbing (Martindale) Method | Cleanability
ISO ISO 2796 Cellular plastics, rigid — Test for dimensional stability | Shrinkage / Dimensional Stability
ISO ISO 2808 (Methods 6A-1, 6B) Paints and varnishes — Determination of film thickness (Methods 6A-1) | Film Thickness
ISO ISO 2812-4 Paints and Varnishes – Determination of Resistance to Liquids – Part 4: Spotting Methods | Stain
ISO ISO 2813 Paints and Varnishes – Determination of Gloss Value at 20 Degrees, 60 Degrees, and 85 Degrees | Gloss
ISO ISO 291 Plastics — Standard atmospheres for conditioning and testing | Conditioning
ISO ISO 294-4 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage | Shrinkage / DimensionalStability
ISO ISO 306 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) | HDT / VICAT /SOFT POINT
ISO ISO 307 Plastics — Polyamides — Determination of viscosity number | Viscosity
ISO ISO 3146:19851 (Method C) Plastics – Determination of Melting Behaviour (Melting Temperatur or Melting Range) of Semi-Crystalline Polymers by Capillary Tube and Polarizing-Microscope Methods | Thermal Analysis

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber