Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
ISO ISO 14125 Fibre-reinforced plastic composites — Determination of flexural properties | Flex
ISO ISO 1421 Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break | Tensile
ISO ISO 14419 Textile – Oil Repellency – Hydrocarbon Resistance Test | Stain
ISO ISO 15512 (Methods A and B) Plastics – Determination of Water Content | Moisture Content
ISO ISO 15701 Leather — Tests for colour fastness — Colour fastness to migration into polymeric material | Stain
ISO ISO 1628 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing | Viscosity
ISO ISO 171 Plastics — Determination of bulk factor of moulding materials | Density / Weight
ISO ISO 17235 Leather — Physical and mechanical tests — Determination of softness | Stiffness
ISO ISO 175 Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals | Fluid Immersion / Extraction
ISO ISO 176 Plastics — Determination of loss of plasticizers — Activated carbon method | Volatile Loss
ISO ISO 178 Plastics — Determination of flexural properties | Flex
ISO ISO 179 Plastics — Determination of Charpy impact strength of rigid materials | Impact
ISO ISO 1798 Flexible cellular polymeric materials — Determination of tensile strength and elongation at break | Tensile
ISO ISO 180 Plastics — Determination of Izod impact strength | Impact
ISO ISO 1817 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids | Fluid Immersion / Extraction
ISO ISO 1856 Flexible cellular polymeric materials — Determination of compression set | Compression
ISO ISO 188 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests | Oven / Exposure Cycle
ISO ISO 1923 Cellular plastics and rubbers — Determination of linear dimensions | Plastic (General)
ISO ISO 1926 Rigid cellular plastics — Determination of tensile properties | Tensile
ISO ISO 2039-2 Plastics — Determination of hardness — Part 2: Rockwell hardness | Hardness

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber