Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
Automotive Ford FLTM BO 130-01 Resistance Of Polymers And Adhesives To Engine Coolants | Fluid Immersion / Extraction
Automotive Ford FLTM BO 131-03 Interior Odor Test | Odor
Automotive Ford FLTM BO 151-01 Resistance To Low Temperature Impact | Impact
Automotive Ford FLTM BO 157-01 Test For Adequate Curing Of Flexible Pvc Materials | Fluid Immersion / Extraction
Automotive Ford FLTM BO 158-03 Determination Of Chemical Stress Crack Resistance Of Plastic Parts Under Mechanical Stress | Chemical Stress Resistance
Automotive Ford FLTM BO 162-01 Resistance To Scratch And Marr | Scuff / Mar
Automotive Ford FLTM BO 163-01 Denting Test For Interior Parts With Metal Appliqués | Impact
Automotive Ford FLTM BP 003-02 Friction Test For Weatherstrip Coatings | Friction
Automotive Ford FLTM BP 008-03 Strength Of Adhesion Between Tube And Cover Of Open Weave Reinforced Rubber Hose | Peel
Automotive Ford FLTM BP 008-05 Engine Coolant Immersion Test | Fluid Immersion / Extraction
Automotive Ford FLTM BP 010-01 Determination Of Percent Volume Change In Buna “N” Rubber After Oil Immersion | Fluid Immersion / Extraction
Automotive Ford FLTM BP 117-01 Polymeric Materials – High Viscosity Lubricant Compatibility | Fluid Immersion / Extraction
Automotive Ford FLTM BP 153-01 Staining Of Surfaces By Polymers And Elastomers | Stain
Automotive Ford FLTM BQ 007-02 Acid Dissolution Test For Decorative Aluminum Parts | Salt Spray / Corrosion
Automotive Ford FLTM BQ 104-02 Humidity Resistance Testing | Humidity
Automotive Ford FLTM BQ 104-07 Environmental Test Cycles | Oven / Exposure Cycle
Automotive Ford FLTM BQ 105-01 Copper-Accelerated Acetic Acid-Salt Spray Testing (Cass Test) | Salt Spray / Corrosion
Automotive Ford FLTM BS 002-01 Warp Test On Paper Board | Warpage
Automotive Ford FLTM BU 001-01 Moisture Vapor Transmission Rate Of Waterproof Tape | Moisture Vapor Transmission
Automotive Ford FLTM BU 001-02 Water Penetration Rate Of Waterproof Tape | Moisture Vapor Transmission

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber