Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
Automotive Ford FLTM BO 024-02 Determination Of Moisture Content Of Nylon – Vacuum Oven Method | Moisture Content
Automotive Ford FLTM BO 029-03 Water Immersion – Warp Test Of Elastomers And Plastics | Warpage
Automotive Ford FLTM BO 040 Procedure B Short Term Environmental Cycling and Long Term Heat Exposure | Oven / Exposure Cycle
Automotive Ford FLTM BO 061-01 Determining the Tackness of Interior Materials | Stain
Automotive Ford FLTM BO 101-05 Determination Of Fuel Resistance Of Plastic Parts | Stain
Automotive Ford FLTM BO 101-06 Adhesion Strength Of Coextruded Blow Molded Plastic Fuel Tank Material By T-Peel Test Method | Peel
Automotive Ford FLTM BO 111-01 Indentation Test For Crash Pads | Compression
Automotive Ford FLTM BO 111-02 Test For Indentation And Recovery | Compression
Automotive Ford FLTM BO 112-06 Staining Of Trim Material Identification Markings | Stain
Automotive Ford FLTM BO 113-03 Load Deflection Test | Compression
Automotive Ford FLTM BO 113-04 Rolling Sphere Fatigue Test For Arm Rest And Other Intricate Trim Assemblies | Compression
Automotive Ford FLTM BO 113-04 Rolling Sphere Fatigue Test For Arm Rest And Other Intricate Trim Assemblies | Flex Fold
Automotive Ford FLTM BO 115-01 Plastics – Resistance To Artificial Weathering | Oven / Exposure Cycle
Automotive Ford FLTM BO 115-02 Resistance Of Plastics To Artificial Weathering | Oven / Exposure Cycle
Automotive Ford FLTM BO 116-01 Resistance To Interior Weathering | Weathering
Automotive Ford FLTM BO 116-03 (7/90)1 Interior Trim Fogging Characteristics (Use The Following Sae Standard With 3 Hours At 100 C Heating, 21 C Cooling Plate, Post Test Conditioning 1 And 16 Hours | Fogging
Automotive Ford FLTM BO 117-02 Impact Test For Plastics | Impact
Automotive Ford FLTM BO 127-03 Stress Cracking Test For Plastics | Chemical Stress Resistance
Automotive Ford FLTM BO 129-01 Water Immersion – Dimensional Stability Of Elastomers And Plastics | Shrinkage / DimensionalStability
Automotive Ford FLTM BO 129-02 Water Absorption – Elastomers And Plastics | Water Absorption

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber