Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
Automotive Mitsubishi ES-X60410 Flammability of Interior Materials | Flammability
Automotive Mitsubishi ES-X83217 Polyvinyl Chloride Coated Fabrics and Polyvinyl Chloride Sheet Interior and Exterior | Fogging
Automotive Mitsubishi ES-X83231 Standard Test Method for Fogging of Interior Materials | Fogging
Automotive Fiat Fiat 50180 Corrosion Tests | Salt Spray / Corrosion
Automotive Fiat Fiat 50451/01 (Method A) Accelerated Ageing in Sunlight | Weathering
Automotive Fiat Fiat 50560 Linear Expansion Coefficient Check For Thermoset Plastics [Frozen] | Thermal Expansion
Automotive Fiat Fiat 7-G2000 Determining The Resistance To Combustion Of The Non-Metallic Materials For Parts Inside Vehicle Passenger Compartment | Flammability
Automotive Ford FLTM AN 101-01 Resistance Of Textiles To Bleeding, Perspiration And Water Spotting | Stain
Automotive Ford FLTM AN 102-01 Resistance Of Plastic Materials To Hydrogen Sulfide Staining | Stain
Automotive Ford FLTM BI 004-03 Galvanic Effects On Painted Non-Metallic Exterior Parts | Salt Spray / Corrosion
Automotive Ford FLTM BI 010-02 Measurement Of Gloss Change Of Flat Enamels After Polishing | Gloss
Automotive Ford FLTM BI 102-01 Determination Of Weight Of Non-Volatile Content In Paint | Moisture Content
Automotive Ford FLTM BI 102-03 Accelerated Shelf Stability Test Of Paint | Viscosity
Automotive Ford FLTM BI 103-01 Salt Spray Resistance Test For Painted Panels And Parts | Salt Spray / Corrosion
Automotive Ford FLTM BI 104-01 Water Immersion Test For Painted Parts And Panels | Fluid Immersion / Extraction
Automotive Ford FLTM BI 104-04 Adhesion/Immersion Test | Paint Adhesion
Automotive Ford FLTM BI 106-01 Coating Adhesion Test | Paint Adhesion
Automotive Ford FLTM BI 107-02 Determination Of Cold Checking Resistance To Exterior Automotive Topcoats | Oven / Exposure Cycle
Automotive Ford FLTM BI 107-05 Thermal Shock Test For Coating Adhesion | Thermal Shock
Automotive Ford FLTM BI 108-01 Impact Test For Painted Panels | Impact

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber