Accredited Tests We Perform

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the tests listed below with the drop-downs or search by keyword.


Industry Publisher Spec ID Title
ASTM ASTM D882 Tensile Properties of Thin Plastic Sheeting | Tensile
ASTM ASTM D896 Resistance of Adhesive Bonds to Chemical Reagents | Fluid Immersion / Extraction
ASTM ASTM D903 Peel or Stripping Strength of Adhesive Bonds | Peel
ASTM ASTM D925 (Methods A and B) Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion) | Stain
ASTM ASTM D955 Measuring Shrinkage from Mold Dimensions of Thermoplastics | Shrinkage / DimensionalStability
ASTM ASTM D968 Abrasion Resistance of Organic Coatings by Falling Abrasive | Abrasion: Falling Sand
ASTM ASTM E1131 Compositional Analysis by Thermogravimetry | Thermal Analysis
ASTM ASTM E1252 (Section 9.0) General Techniques for Obtaining Infrared Spectra for Qualitative Analysis | Infrared Scan
ASTM ASTM E1269 Determining Specific Heat Capacity by Differential Scanning Calorimetry | Thermal Analysis
ASTM ASTM E1356 Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry | Thermal Analysis
ASTM ASTM E1428 Evaluatiing the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species | Fungus / Mildew
ASTM ASTM E1545 Assignment of the Glass Transition Temperature by Thermomechanical Analysis | Thermal Analysis
ASTM ASTM E1640 Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis | Shear Strength
ASTM ASTM E168 Infrared Quantitative Analysis | Infrared Scan
ASTM ASTM E313 Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates | Color Evaluation
ASTM ASTM E793 Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry | Thermal Analysis
ASTM ASTM E794 Melting And Crystallization Temperatures By Thermal Analysis | Thermal Analysis
ASTM ASTM E831 Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis | Thermal Analysis
ASTM ASTM E96 Gravimetric Determination of Water Vapor Transmission Rate of Materials | Moisture Vapor Transmission
ASTM ASTM F2357-101 Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool RCA Abrader | Abrasion: RCA

Quickly search to find out if Ghesquiere Plastic Testing is accredited for your specific test:

Filter the listed below with the drop-downs or search by keyword.





Publishers Spec ID Post title
Stellantis (Chrysler) 7.M0021 PVC Amine Reddening Evaluation | Stain
AATCC AATCC EP1 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP1
AATCC AATCC EP2 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP2
AATCC AATCC EP8 CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC EP8
AATCC AATCC TM 107 Colorfastness to Water | Stain
AATCC AATCC TM 118 Oil Repellency: Hydrocarbon Resistance Test | Stain
AATCC AATCC TM 15 Colorfastness to Perspiration | Stain
AATCC AATCC TM 16.2 Colorfastness to Light | Weathering
AATCC AATCC TM 173 (Evaluation Procedures 1, 2, and 8) CMC: Calculation of Small Color Differences for Acceptability | Color Evaluation | AATCC TM 173
AATCC AATCC TM 23 Colorfastness to Burnt Gas Fumes | Stain
AATCC AATCC TM 30 (Parts II, III) Antifungal Activity, Assessment on Textile Materials: Mildew and Rot Resistance of Textile Materials | Fungus / Mildew
AATCC AATCC TM 8 Colorfastness to Crocking – Crockmeter Method | Crocking
ASTM ASTM B117 Operating Salt Spray (Fog) Apparatus | Salt Spray / Corrosion
ASTM ASTM B368 Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) | Salt Spray / Corrosion
ASTM ASTM C584 Specular Gloss of Glazed Ceramic Whitewares and Related Products | Gloss
ASTM ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications | Peel
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics | Gloss
ASTM ASTM D1004 Initial Tear Resistance of Plastic Film and Sheeting | Tear Strength: Die “C”
ASTM ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion | Abrasion: Taber