UA-4278894-1 ISO - International Standards Organization | <span style="font:36px Times-Bold; font-weight:bold; color:#000000;font-weight:bold; "><u>GHESQUIERE PLASTIC TESTING, INC.</u></span>
Following is a list of ISO specifications that Ghesquiere Plastic Testing, Inc. is able to test to:

Request a quotation for your testing services needs.


ISO 34
Rubber, vulcanized -- Determination of tear strength (trouser, angle and crescent test pieces)
ISO 37
Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
ISO 62
Plastics -- Determination of water absorption
ISO 75
Plastics and ebonite -- Determination of temperature of deflection under load
ISO 105-A02
Textiles -- Tests for colour fastness -- Part A02: Grey scale for assessing change in colour
ISO 105-A03
Textiles -- Tests for colour fastness -- Part A03: Grey scale for assessing staining
ISO 105-B06
Textiles -- Tests for colour fastness -- Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (Procedure 5)
ISO 105-G02
Textiles -- Tests for colour fastness -- Part G02: Colour fastness to burnt-gas fumes
ISO 105-X12
Textiles -- Tests for colour fastness -- Part X12: Colour fastness to rubbing
ISO 171
Plastics -- Determination of bulk factor of moulding materials
ISO 175
Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 176
Plastics -- Determination of loss of plasticizers -- Activated carbon method
ISO 178
Plastics -- Determination of flexural properties
ISO 179
Plastics -- Determination of Charpy impact strength of rigid materials
ISO 180
Plastics -- Determination of Izod impact strength
ISO 183
Plastics -- Qualitative evaluation of the bleeding of colorants
ISO 188
Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests
ISO 291
Plastics -- Standard atmospheres for conditioning and testing
ISO 294-4
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
ISO 306
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
ISO 307
Plastics -- Polyamides -- Determination of viscosity number
ISO 527
Plastics -- Determination of tensile properties
ISO 604
Plastics -- Determination of compressive properties
ISO 812
Rubber, vulcanized or thermoplastic -- Determination of low-temperature brittleness
ISO 815
Rubber, vulcanized or thermoplastic -- Determination of compression set at ambient, elevated or low temperatures
ISO 844
Rigid cellular plastics -- Determination of compression properties
ISO 845
Cellular plastics and rubbers -- Determination of apparent density
ISO 846
Plastics -- Evaluation of the action of microorganisms
ISO 868
Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 960
Plastics -- Polyamides (PA) -- Determination of water content (Method A)
ISO 974
Plastics -- Determination of the brittleness temperature by impact
ISO 1133
Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1172
Textile-glass-reinforced plastics -- Prepregs, moulding compounds and laminates -- Determination of the textile-glass and mineral-filler content -- Calcination methods
ISO 1183-1
Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method (Method A)
ISO 1184
Plastics -- Determination of tensile properties of films
ISO 1218
Plastics -- Polyamides -- Determination of "melting point" (Method B)
ISO 1326
Plastics -- Determination of flammability and burning rate of plastics in the form of film
ISO 1421
Rubber- or plastics-coated fabrics -- Determination of tensile strength and elongation at break
ISO 1431-1
Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing
ISO 1628
Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing
ISO 1798
Flexible cellular polymeric materials -- Determination of tensile strength and elongation at break
ISO 1817
Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids
ISO 1856
Flexible cellular polymeric materials -- Determination of compression set
ISO 1923
Cellular plastics and rubbers -- Determination of linear dimensions
ISO 1926
Rigid cellular plastics -- Determination of tensile properties
ISO 2039-2
Plastics -- Determination of hardness -- Part 2: Rockwell hardness
ISO 2062
Textiles -- Yarns from packages -- Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
ISO 2409
Paints and varnishes -- Cross-cut test
ISO 2578
Plastics -- Determination of time-temperature limits after prolonged exposure to heat
ISO 2589
Leather -- Physical and mechanical tests -- Determination of thickness
ISO 2796
Cellular plastics, rigid -- Test for dimensional stability
ISO 2808
Paints and varnishes -- Determination of film thickness (Methods 6A-1)
ISO 3146:1985
Plastics -- Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (Method C)
ISO 3268
Plastics -- Glass reinforced materials -- Determination of tensile properties. Revised byISO 527-4.
ISO 3386
Polymeric materials, cellular flexible -- Determination of stress-strain characteristics in compression
ISO 3451
Plastics -- Determination of ash
ISO 3795
Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials
ISO 4440
Polyethylene (PE) pipes and fittings -- Determination of melt flow rate
ISO 4577
Plastics -- Polypropylene and propylene-copolymers -- Determination of thermal oxidative stability in air -- Oven method
ISO 4585
Textile glass reinforced plastics -- Determination of apparent interlaminar shear properties by short-beam test. Revised by ISO 14130
ISO 4587
Adhesives -- Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 4591
Plastics -- Film and sheeting -- Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO 4599
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Bent strip method
ISO 4611
Plastics -- Determination of the effects of exposure to damp heat, water spray and salt mist
ISO 4628-1
Paints and varnishes -- Evaluation of degradation of coatings -- General introduction and designation system
ISO 4628-2
Paints and varnishes -- Evaluation of degradation of coatings -- Assessment of degree of blistering
ISO 4628-3
Paints and varnishes -- Evaluation of degradation of coatings -- Assessment of degree of rusting
ISO 4628-8
Paints and varnishes -- Evaluation of degradation of coatings -- Assessment of degree of delamination and corrosion around a scribe or other artificial defect
ISO 4674-1
Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 1: Constant rate of tear methods (Method B)
ISO 4892
Plastics -- Methods of exposure to laboratory light sources
ISO 5084
Textiles -- Determination of thickness of textiles and textile products
ISO 5402
Leather -- Physical and mechanical tests -- Determination of flex resistance by flexometer method
ISO 6133
Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 6237
Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by tensile loading
ISO 6238
Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by compressive loading
ISO 6239
Plastics -- Determination of tensile properties by use of small specimens
ISO 6383
Plastics -- Film and sheeting -- Determination of tear resistance
ISO 6383
DUPLICATE - SEE ABOVE
ISO 6427
Plastics -- Determination of matter extractable by organic solvents (conventional methods)
ISO 6452
Rubber- or plastics-coated fabrics -- Determination of fogging characteristics of trim materials in the interior of automobiles
ISO 6603-1
Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing
ISO 6603-2
Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing
ISO 6722-1
Road vehicles -- 60 V and 600 V single-core cables -- Part 1: Dimensions, test methods and requirements for copper conductor cables
ISO 6916-1
Flexible cellular polymeric materials -- Sponge and expanded cellular rubber products -- Specification -- Part 1: Sheeting (Annex E)
ISO 6964
Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method and basic specification
ISO 6988
Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture
ISO 7326
Rubber and plastics hoses -- Assessment of ozone resistance under static conditions
ISO 7765
Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method
ISO 8033
Rubber and plastics hoses -- Determination of adhesion between components
ISO 8067
Flexible cellular polymeric materials -- Determination of tear strength
ISO 8295
Plastics -- Film and sheeting -- Determination of the coefficients of friction
ISO 8510-2
Adhesives -- Peel test for a flexible-bonded-to-rigid test specimen assembly -- Part 2: 180 degree peel
ISO 9073-1
Textiles -- Test methods for nonwovens -- Part 1: Determination of mass per unit area
ISO 9073-2
Textiles -- Test methods for nonwovens -- Part 2: Determination of thickness (Method A)
ISO 9227
Corrosion tests in artificial atmospheres -- Salt spray tests
ISO 11357
Plastics -- Differential scanning calorimetry (DSC)
ISO 11358
Plastics -- Thermogravimetry (TG) of polymers -- General principles
ISO 11359
Plastics -- Thermomechanical analysis (TMA)
ISO 13934
Textiles -- Tensile properties of fabrics
ISO 13937-2
Textiles -- Tear properties of fabrics -- Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
ISO 14125
Fibre-reinforced plastic composites -- Determination of flexural properties
ISO 15512
Plastics -- Determination of water content (Methods A and B)
ISO 15701
Leather -- Tests for colour fastness -- Colour fastness to migration into polymeric material
ISO 17235
Leather -- Physical and mechanical tests -- Determination of softness
ISO 20433
Leather -- Tests for colour fastness -- Colour fastness to crocking
ISO 22088-3
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 3: Bent strip method
ISO 2286-2
Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 2286-3
Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 3: Method for determination of thickness
ISO 26082-1
Leather -- Physical and mechanical test methods for the determination of soiling -- Part 1: Rubbing (Martindale) method