UA-4278894-1 ASTM | <span style="font:36px Times-Bold; font-weight:bold; color:#000000;font-weight:bold; "><u>GHESQUIERE PLASTIC TESTING, INC.</u></span>
Following is a list of ASTM specifications that Ghesquiere Plastic Testing, Inc. is able to test to:

Request a quotation for your testing services needs.

% Relative Humidity


ASTM B117
Operating Salt Spray (Fog) Apparatus
ASTM B368
Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
ASTM C584
Specular Gloss of Glazed Ceramic Whitewares and Related Products
ASTM D1000
Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM D1003
Haze and Luminous Transmittance of Transparent Plastics
ASTM D1004
Initial Tear Resistance of Plastic Film and Sheeting
ASTM D1044
Resistance of Transparent Plastics to Surface Abrasion
ASTM D1053
Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
ASTM D1056
Flexible Cellular Materials—Sponge or Expanded Rubber
ASTM D1117
Guide for Evaluating Nonwoven Fabrics
ASTM D1149
Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D1171
Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)
ASTM D1200
Viscosity by Ford Viscosity Cup
ASTM D1203
Volatile Loss From Plastics Using Activated Carbon Methods
ASTM D1204
Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1238
Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1278
Rubber from Natural Sources—Chemical Analysis
ASTM D1329
Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
ASTM D1424
Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
ASTM D1455
60° Specular Gloss of Emulsion Floor Polish
ASTM D1475
Density of Liquid Coatings, Inks, and Related Products
ASTM D1499
Filtered Open-Flame Carbon-Arc Exposures of Plastics
ASTM D1506
Carbon Black—Ash Content
ASTM D1509
Carbon Black—Heating Loss
ASTM D1525
Vicat Softening Temperature of Plastics
ASTM D1603
Carbon Black Content in Olefin Plastics
ASTM D1621
Compressive Properties of Rigid Cellular Plastics
ASTM D1654
Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D1667
Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)
ASTM D1683
Failure in Sewn Seams of Woven Apparel Fabrics
ASTM D1693
Environmental Stress-Cracking of Ethylene Plastics
ASTM D1709
Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1712
Resistance of Plastics to Sulfide Staining
ASTM D1735
Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D1777
Thickness of Textile Materials
ASTM D1790
Brittleness Temperature of Plastic Sheeting by Impact
ASTM D1813
Measuring Thickness of Leather Test Specimens
ASTM D1815
Water Absorption (Static) of Vegetable Tanned Leather
ASTM D1822
Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
ASTM D1894
Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
ASTM D1912
Cold-Crack Resistance of Upholstery Leather
ASTM D1913
Resistance to Wetting of Garment-Type Leathers (Spray Test)
ASTM D1922
Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1938
Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D2059
Resistance of Zippers to Salt Spray (Fog)
ASTM D2061
Strength Tests for Zippers
ASTM D2097
Flex Testing of Finish on Upholstery Leather
ASTM D2124
Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM D2134
Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM D2137
Rubber Property - Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D2196
Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
ASTM D2208
Breaking Strength of Leather by the Grab Method
ASTM D2209
Tensile Strength of Leather
ASTM D2211
Elongation of Leather
ASTM D2240
Rubber Property—Durometer Hardness (Shore A, D)
ASTM D2244
Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2247
Testing Water Resistance of Coatings in 100
ASTM D2256
Tensile Properties of Yarns by the Single-Strand Method
ASTM D2261
Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D2344
Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D256
Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D2565
Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
ASTM D2584
Ignition Loss of Cured Reinforced Resins
ASTM D2842
Water Absorption of Rigid Cellular Plastics
ASTM D297
Rubber Products—Chemical Analysis (Hydrostatic Method s. 16.3)
ASTM D3012
Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
ASTM D3045
Heat Aging of Plastics Without Load
ASTM D3163
Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D3164
Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3170
Chipping Resistance of Coatings
ASTM D3330
Peel Adhesion of Pressure-Sensitive Tape
ASTM D3359
Measuring Adhesion by Tape Test
ASTM D3363
Film Hardness by Pencil Test
ASTM D3364
Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D3418
Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3574
Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
ASTM D3575
Flexible Cellular Materials Made From Olefin Polymers
ASTM D3763
High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
ASTM D3774
Width of Textile Fabric
ASTM D3775
Warp (End) and Filling (Pick) Count of Woven Fabrics
ASTM D3776
Mass Per Unit Area (Weight) of Fabric
ASTM D3795
Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D3801
Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D3826
Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
ASTM D3846
In-Plane Shear Strength of Reinforced Plastics
ASTM D3850
Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3882
Bow and Skew in Woven and Knitted Fabrics
ASTM D3884
Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
ASTM D3886
Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
ASTM D3895
Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D395
Rubber Property—Compression Set
ASTM D4060
Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D4065
Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
ASTM D412
Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers-Tension
ASTM D4129 (Procedure A)
Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
ASTM D413
Rubber Property—Adhesion to Flexible Substrate
ASTM D4157
Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method
ASTM D4218
Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
ASTM D4339
Determination of the Odor of Adhesives
ASTM D4355
Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
ASTM D4440
Plastics: Dynamic Mechanical Properties Melt Rheology
ASTM D4459
Xenon-Arc Exposure of Plastics Intended for Indoor Applications
ASTM D4473
Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM D4475
Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
ASTM D4476
Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM D4533
Trapezoid Tearing Strength of Geotextiles
ASTM D4585
Testing Water Resistance of Coatings Using Controlled Condensation
ASTM D461
Test Method for Felt
ASTM D4632
Grab Breaking Load and Elongation of Geotextiles
ASTM D4705
Stitch Tear Strength of Leather, Double Hole
ASTM D471
Rubber Property—Effect of Liquids
ASTM D4812
Unnotched Cantilever Beam Impact Resistance of Plastics
ASTM D4884
Strength of Sewn or Bonded Seams of Geotextiles
ASTM D4966
Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
ASTM D5028
Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5031
Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM D5034
Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D5035
Breaking Force and Elongation of Textile Fabrics (Strip Method)
ASTM D5071
Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
ASTM D5132
Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
ASTM D5208
Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
ASTM D523
Specular Gloss
ASTM D5279
Plastics: Dynamic Mechanical Properties: In Torsion
ASTM D5393-93
Determination of Fogging Characteristics of Vehicle Interior Trim Materials (Withdrawn 1998)
ASTM D5402
Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM D5420
Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5587
Tearing Strength of Fabrics by Trapezoid Procedure
ASTM D5590
Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM D5628
Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5630 (Method B)
Ash Content in Plastics
ASTM D570
Water Absorption of Plastics
ASTM D573
Rubber—Deterioration in an Air Oven
ASTM D5733-99
Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure
ASTM D5734 (2008)Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus
ASTM D586
Ash in Pulp, Paper, and Paper Products
ASTM D6110
Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D618
Conditioning Plastics for Testing
ASTM D6182
Flexibility and Adhesion of Finish on Leather
ASTM D624
Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D629
Quantitative Analysis of Textiles
ASTM D635
Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
ASTM D638
Tensile Properties of Plastics
ASTM D6413
Flame Resistance of Textiles (Vertical Test)
ASTM D648 (Method B)
Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D6869
Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM D695
Compressive Properties of Rigid Plastics
ASTM D696
Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
ASTM D732
Shear Strength of Plastics by Punch Tool
ASTM D737
Air Permeability of Textile Fabrics
ASTM D746
Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D747
Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D751
Standard Test Methods for Coated Fabrics
ASTM D751 (Section 60)
Standard Test Methods for Coated Fabrics
ASTM D785
Rockwell Hardness of Plastics and Electrical Insulating Materials(Scales R
ASTM D7869
Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
ASTM D789
Determination of Solution Viscosities of Polyamide (PA) (Section 9.3)
ASTM D790
Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D792
Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D822
Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D870
Testing Water Resistance of Coatings Using Water Immersion
ASTM D882
Tensile Properties of Thin Plastic Sheeting
ASTM D896
Resistance of Adhesive Bonds to Chemical Reagents
ASTM D903
Peel or Stripping Strength of Adhesive Bonds
ASTM D925
Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion) (Methods A and B)
ASTM D955
Measuring Shrinkage from Mold Dimensions of Thermoplastics
ASTM D968
Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM E1131
Compositional Analysis by Thermogravimetry
ASTM E1252
General Techniques for Obtaining Infrared Spectra for Qualitative Analysis (Section 9.0)
ASTM E1269
Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1356
Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E1545
Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM E1640
Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E168
Infrared Quantitative Analysis
ASTM E313
Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
ASTM E793
Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E794
Melting And Crystallization Temperatures By Thermal Analysis
ASTM E831
Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E96
Water Vapor Transmission of Materials
ASTM F2357
Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool RCA Abrader
ASTM F778
Gas Flow Resistance Testing of Filtration Media
ASTM G152
Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G153
Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G154
Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM G155
Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G21
Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM G23 (1996)
Light-Exposure Apparatus (Carbon-Arc Type) with or without Water for Exposure on Nonmetallic Materials(replaced by ASTM G152)
ASTM G26 (1996)
Light-Exposure Apparatus (Xenon-Arc Type) with or without Water for Exposure on Nonmetallic Materials ( replaced by ASTM G155)
ASTM G53 (1996)
Light & Water Exposure Apparatus (Flourescent UV Condensation Type) for Exposure of Nonmetallic Materials (replaced by ASTM G154)
ASTM G87
Standard Practice for Conducting Moist SO2 Tests